Why Paint When You Can Update Your Home In Only 5 Minutes?
How It Works
Step 1: Prep Your Wall
Step 2: Refresh Your Wall
Step 2: Refresh Your Wall
- Start with a clean, smooth, and dry surface.
- Remove batten strips (the vertical strips that cover the wallboard seams).
- Remove electrical and light switch covers.
- Apply wire mesh patch over holes or damaged areas (if needed).
Step 2: Refresh Your Wall
Step 2: Refresh Your Wall
Step 2: Refresh Your Wall
- Peel back about 12" of the top of the Wallboard Refresh paper backing to expose the self-adhesive.
- Apply Wallboard Refresh evenly to the top of your wall so the self-adhesive backing affixes to your existing wallboard.
- Continue applying evenly in a downward movement by peeling back 12" sections at a time.
- Trim excess at base of the wall with razor blade.
Step 3: Finishing Touches
Step 2: Refresh Your Wall
Step 3: Finishing Touches
- Use a squeegee or credit card to smooth any air bubbles to the edge of the wall.
- Carefully trim around any light switches or sockets with a razor blade and remove excess product.
- Reinstall light switch and socket covers.
- Remove the paper on the back of your new color-matched batten strips to expose the self-adhesive.
- Apply the batten strips to the wall to cover the wallboard seams.
